How to make new fashionable ones out of old clothes with your own hands, photo

The situation when the engine does not start due to a weak or completely dead battery is familiar to many drivers firsthand, especially when the time of autumn and winter cold comes. The easiest way to solve this problem is to get a cigarette from a neighbor, but what if suddenly there is no one nearby?

In fact, there is a solution in this case too, and it consists in using a removable screwdriver battery.

Embroidery

Things with a non-trivial character are a new and, apparently, long-lasting trend. Today, girls are not tempted by the prospect of looking like everyone else, and they are coming up with new ways to emphasize their individuality. For example, many people master the simple art of embroidery. By spending just half an hour, you can significantly transform your boring jeans or other clothes. Most importantly, with the help of such simple manipulations you will create an absolutely unique thing that is guaranteed to make you stand out from the crowd.

The most basic option for transforming a thing is to embroider inscriptions or rainbows. Such designs are made with simple stitches and do not require much time.

How to Make a Screwdriver From the Network With Your Hands

Content

How to make it network

Any home cannot do without a home assistant, which is a screwdriver. This is an electrical device that can be used not only to screw screws, but also to drill holes.

The main advantage of such a device is its mobility, which is provided by a twelve-volt battery. There are no more powerful versions of screwdrivers, the battery of which has a constant voltage of eighteen volts.

If the device is not used for a long time, the battery will spontaneously discharge, which is a negative factor. When the battery is unusable, then the screwdriver becomes useless, so we find out that the most suitable power supply is two hundred twenty volts.

Ways to solve the problem

A tool such as a screwdriver, although not the most popular, unfortunately, not every home craftsman uses it every day. Increasingly, the battery is subject to spontaneous discharge, under the influence of which the internal structure of the product is destroyed.

When the battery does not last for several minutes, the question arises, what to do with the screwdriver now? They buy a new battery, alas, first you have to find it, because you can find exactly the same design of the power element, of course, only from official dealers. The second option is to throw away the screwdriver and not buy a new one, the cost of which is less than 2-3 (this is an average quality product). The third option is the simplest, but it immediately requires effort - to convert the product to be powered by alternating voltage.

The advantages of the latter option are the following factors:

No need to constantly recharge the battery, which is very annoying during operation;
Now there is an option to store a screwdriver for as long as you like, without thinking about what it really is, that the battery is constantly discharging spontaneously;
Constant, which implements voltage from the mains.

READ Wood Sanders Makita

Among all the advantages, there will be only one drawback, which is due to the need to connect the device to an outlet, so the product must be connected to the electrical network.

Required materials and tools

For most, the third option seems difficult, because it is much easier to buy a new device and not use it for several years. In reality, an old screwdriver will last even longer, but you need to restore it. This is easy to do; for this purpose you will need the following tools and materials:

A charger that previously played an important role.
Multicore electrical cable.
A battery from a screwdriver that has become unusable.

The tools you will need are a soldering iron, acid, solder and insulating tape.

Such details will allow you to transform the screwdriver so that it can be connected to the network

two hundred twenty volts.

??How to convert a screwdriver to power from a 220 network

Corded screwdrivers

Russia .

Where to start work

To convert a screwdriver to be powered from a two hundred twenty V electrical network, first of all, you will need to solder an electrical wire to the contacts of the charger. However, since the wire has copper conductors and the power supply has brass terminals, connecting them will be very difficult. However, nothing is impossible in the whole world, so we use acid for the connector. It is necessary to treat the terminals with acid, then solder the wire to the contacts. The connection will be of high quality, since the contact and the functioning of the device itself depend on it.
Next, the old battery is rebuilt. For this purpose
, it must be disassembled so as not to remove the entire internal part with its use. Although the manufacturer does not recommend doing this, we will need the battery design. When disassembling the battery, it is important to use protective equipment and not even throw the internal contents in the trash, but rather recycle it. A weight should be placed in the battery case that will not act as a counterweight.
If the inside of the battery is removed, we begin the process of soldering the free contacts of the electrical cable to the battery terminals located in the inside of the case.

READ How to Make a Machine from a Screwdriver

Important! When soldering, it is important to control the polarity; if it is not observed, then nothing terrible will happen, only the device will function in the other direction. But with the help of a switch this situation can be easily resolved.

The electrical cable is inserted into the battery from the outside, making a special hole in the structure of the required diameter. When you get tired of this it is important to do

so that the cable is securely fixed in the battery housing structure.
For this purpose, you do not need insulating tape, which requires you to wrap the cable from the inside, not the outside, thereby making a lock. After this fact, we insert the battery case into the screwdriver and do not use it for its intended purpose.

Options on how to do it (Video)

In this case, it is not the power supply that has become unusable, then do not worry, since there are other options for how to power the screwdriver:

PC power supply

The power supply for a screwdriver comes from a PC, which is much easier to find than a new battery for the device. The advantage of a PC is the fact that it is possible to obtain different current values at the output, which is considered very important.

READ How to Insert a Drill Into a Rotary Hammer

In the design of the power supply

The PC has a cooler that provides cooling of the transformer and its non-component elements, so we should immediately note that this type of power supply is durable; you won’t forget about problems with the screwdriver in the next long time.

Old inverter welding

To power the screwdriver, of course, using the old inverter welding, you will need skills in electrical engineering theory. After all, it is necessary to add a secondary coil of the transformer, which allows you to obtain at the output a completely suitable current for powering the electric motor of the device. Therefore, while connecting the screwdriver to the welding machine, it is necessary to measure the output current and voltage, which are made to correspond to the values of the device.

Car battery

The last option is a car battery, which, of course, is connected to a screwdriver; do not use it in places where it is impossible to obtain two hundred twenty volt power. The disadvantage of such a device is that it is impossible to work with a screwdriver for a long time, since the car one quickly discharges. If the standard UPS of a screwdriver refuses to function, which often happens, then there is no point in rushing to get rid of the device; it is enough to devote hours of time to ensure that the device works even better than with a battery.

Precautionary measures

Afterwards, it is important to adhere to the following precautions:

Allow the device to rest every twenty minutes of operation, which will extend its service life;
It is harmful to work with the device at a height of more than two meters from the ground;
Periodically clean the power supply from dust;
Please ensure that the electrical cable during operation is not pinched, stretched or succumbed to negative factors, which leads to the creation of current.

After the alteration, following the safety rules, the old screwdriver will last longer than the new two.

source

Inspiration from an old shirt

True fashionistas are always sorry to say goodbye to men's shirts, because they intuitively feel that this item can turn into an ultra-fashionable novelty. Their intuition does not deceive! If the shirt is voluminous enough, with the help of a few sewing manipulations it can turn into a fashionable sundress. The resulting item can fit into both a daily and business look.

Another stylish move is to shorten the length and sleeves of the shirt and leave rectangular parts in the hem area, which later turn into a knot at the waist.

You can do it even simpler - just shorten the length of the shirt to the level of the crop top and trim the edge of the product. After such a transformation, loose items with short sleeves and a double-breasted collar look most impressive. Another stylish step is to replace classic buttons with wooden or tortoiseshell hardware.

These examples prove that a formal shirt can easily turn into a very flirty and seductive piece. Just a couple of cutouts in the collarbone area and shortening the length will create the desired effect!

You can also turn a shirt into a stylish top with step-by-step photos. There are only 3 stages that separate a stylish product - cutting off the collar to the boat neckline, saying goodbye to the sleeves and main length, and designing two strips of fabric. The latter can be tied with a spectacular bow at the front or wrapped around the waist and fastened at the back. Both options are equally fashionable!

There might be a denim shirt waiting patiently in your wardrobe. If you are already bored with the usual combinations, it’s time to use your imagination and turn it into a trendy top. Let us remind you that this season any denim items are an absolute trend!

If you don't want to cut anything off, but your soul yearns for stylish experiments, you can play with the way you fix the basic shirt. For example, shaping a bare shoulder and creating a belt at the waist with a loose sleeve is a great idea.

A similar option, but it involves fixing the shirt collar so that the clothing leaves the shoulders open. A bow is created from the sleeves, which highlights the waistline. For a more impressive look, a girl can unbutton a couple of top buttons.

The shirt dress is a classic item, but it is being adapted to fashion trends again and again. Designers boldly and daringly change the classic cut using trendy asymmetry. By the way, any fashionista can follow their example. If you discover your hidden talent as a seamstress, you can design a full skirt from the waistline or stylish puffed sleeves. A simpler transformation option is to create cutouts on the shoulders. This way you can fall in love with a familiar item again and update your wardrobe without extra costs!

How to Make a Screwdriver from a Drill

Content

Functionality in one tool: corded drill/driver

In the household, it is often necessary to use tools such as a screwdriver or a drill. They have different designs and different areas of use. However, the modern market offers various universal tools that perform several tasks at once. There is one there - a corded drill-driver , which is capable of both making holes in materials and not being used for unscrewing or plunging screws.

Drill and screwdriver: what's the difference?

The main task of a screwdriver is to tighten and unscrew small screws and bolts. It can also function as a drill

. In contrast, a drill is only capable of serving its intended purpose, that is, making holes. It is true that these two units are practically no different, but this is a misconception.

Nettle, when tightening the screws with a screwdriver, experiencing heavy loads, the cartridge begins to scroll. This was done with the goal of not causing deformation of the edges on the screw head. Also, a screwdriver has a low rotation speed, in contrast to an electric drill. That is, when you remove your finger from the trigger, it immediately stops, but the drill automatically spins for a couple of weeks.

READ Stihl Ms 180 Oil Supply

Advice! It is more profitable to buy a screwdriver if drilling work is expected, because the drill requires modifications so that, like oil, it can do the work.

Both tools are divided into two types, based on the type of power supply: powered from the mains, not rechargeable. The pros and cons here are obvious. The first type is completely dependent on your location of the outlet, and although batteries do not provide freedom from it, they constantly require recharging.

Also important differences lie in the level of the tool, because there are household ones and not professional ones. So, if the work involves small short-term loads, then there is no point in taking a professional tool. As we have looked at, the difference between a screwdriver and a drill is significant; here you need to take it into account when choosing tools.

Universal drill Screwdriver

How to use a drill

as
a screwdriver
.

How to choose a corded drill/driver?

For household purposes, the best option would be a drill with a screwdriver function. Such a tool has adjustment, which is important for craftsmen working with materials of different densities: when the resistance changes, the rotation gear automatically switches. This results in the screw splines not wearing out. This regulator also allows you to switch the work to drilling, as a result of which torque is transmitted to the drill. For such a function, a screwdriver with a maximum rotation speed of up to one thousand two hundred revolutions per minute would be ideal.

READ How to Make a Grinder from a Drill

Another very important function is reverse, which makes it possible to rotate the nozzle in both directions. In addition, if the drill gets stuck during operation, then by switching the reverse, the operator can easily remove the stuck element. There is no clear answer to the question of a drill/driver for home use, but a battery-powered tool is more convenient. Take this screwdriver

It’s better to have two batteries at once, since while one is in use, the second can be recharged.

Advice! The best type of battery is considered to be a lithium-ion battery, as it is lightweight and quite powerful.

Do-it-yourself alteration

Having figured out how a drill differs from a screwdriver and for what purposes they are intended, you may wonder how to make a screwdriver from a drill , and is it even possible? Yes, you can make it

screwdriver after certain modifications. We work in the following sequence:

Take the tool and remove the battery;
A cable with a cross-section of 2x1.5 millimeters is soldered to the contacts, and the contact block is filled with epoxy resin in place of the battery;
An adapter is made that connects to the battery (it must be connected to the network very carefully due to the rotation of the engine when operating from the network).

READ Bosch Gsr 18 2 Li Plus Review

Note! To operate from the mains, it must be no weaker than four Amperes. In this simple way you can turn a drill into a screwdriver. But it’s still better to buy a tool with this function, because it’s much more reliable. As they say, why reinvent the wheel if it already exists.

source

If you're bored with the jacket

Things from a business wardrobe also tend to get boring or simply go out of fashion. In this case, it is not necessary to say goodbye to a thing with such a sad fate. The bottom of a jacket or vest with a slight movement of the hand can turn into an ultra-fashionable overlay peplum, which will significantly transform the usual combinations. The most fashionable tandem will be with a classic shirt and high-cut trousers. The top of the product can also serve faithfully if you turn it into a stylish crop top.

Interesting: Women's fashion accessories for summer 2020

Corsets

If you are trying to keep up with fashion trends, then you are probably already aware that overlay corsets have returned to the trend. The most interesting thing is that you don’t have to rush to the store to buy such a stylish new item. Elements of a corset can be designed on any loose shirt or T-shirt. An outdated denim item can also be a source of inspiration - with the addition of lacing or a belt, simple flaps can easily be transformed into a stylish corset.

A rectangular piece of fabric with pre-designed ties can also turn into a corset. This makes a stylish addition to a plain shirt.

Buttons

Stylish clothes can be made from old things using buttons. Surely, you have already noticed that dresses with a vertical row of such accessories have been an unconditional trend for several seasons. Did you suspect that such a new fashionable item could come from any loose dress that sadly hangs in the closet without use?

It's simple - you just need to cut the dress in half in the front, strictly in the center. Next, you should make holes for buttons on one side, and the accessories themselves on the other.

Sweater alteration

What can you make from an old sweater? There are probably 2-3 unnecessary jumpers in your closet that will never be worn again.

Do you have an ordinary sweater, mediocre and unnecessary? Why not add an open back? You will need:

How to wear a snood scarf correctly: combination with a down jacket, coat, jacket, fur coat and light clothing
Beautiful dresses for plus size women (100+ photos)
What to wear to celebrate the year of the metal ox in 2021: tips for choosing colors and creating a New Year's look

Scissors.
Button.
Threads with a needle.

The sweater needs to be folded in half vertically and a full slit made in the back. On the left side, buttons are sewn with a slight shift to the side (a button or Velcro will do). On the second side you will need a cut, a second piece of Velcro or a pad for a button.

The edges should be secured by hand sewing or by machine so that the threads do not fray. This is how old clothes turned into new ones.

You can add patches on the elbows. Previously, this was a widespread trend, but even now it does not subside. You will need any contrasting material for the patch. Suitable patches:

Fabric with sequins or beads.
Leather or substitute.
Elm.

All that remains is to sew the patch in place and you're done. You can also make a patch at the elbow so that they do not come off.

Frill

Charming frills have long secured their right to be considered the undisputed trend of the season. If you like such a fashionable novelty, you can complement any basic item with stylish decor. For example, a great idea would be to cut off the hem of a loose dress and design it as a frill. For such an addition, you can use contrasting material.

Stylish ruffles can be successfully placed on a top, jumper or blouse. This season there are no limits to your imagination.

And now let’s move on to the most important question that now worries many readers - how to decorate these frills? The easiest way would be to use regular stitches with the fabric tied together. You can also follow the diagram in the photo to achieve the desired result.

Little tricks on how to use a screwdriver

A screwdriver is the tool that a man uses most often in the household. But with this tool you can not only tighten screws, but also use it for other purposes.

There are situations when you need to drill a very small hole, but the diameter of the screwdriver chuck does not allow this to be done. A simple solution will come to the rescue. To do this, you can use a regular pen refill. This is done as follows:

A small piece is cut from the rod.
The tail of the drill is inserted into it.
A piece of stubble is inserted into the cartridge.

The screwdriver is ready to go!

If you don’t have a rod at hand, you can use plain foil. To do this, you need to take a piece, wrap it around the drill shank, insert it into the screwdriver chuck and you can start working.

Those who have tried to drill a hole in leather products know that it is not so easy. The drill will not take the skin, but will simply ruin it. There is a way out for this situation. You need to take a tube whose hole will be equal to the one you need to drill. The tip of the tube is sharpened in advance using sandpaper. After preparation, the tube is inserted into the screwdriver chuck. Now you can start working.

The following life hack will be useful when you need to sand the inner surface of a hole. To do this, you need to take a drill, which will be smaller in diameter than the hole to be cleaned, wrap sandpaper around it and secure it with glue or another improvised device. After the drill is inserted into the screwdriver, you can safely begin grinding the desired hole.

There are situations when it is necessary to drill a hole of a certain depth, but it is not always possible to do this accurately by eye. The following method has been invented for this. You need to take the drill that will be used to do the work, measure the required length on it, make a mark, and then seal it in its place with masking tape. This way you can get the hole of the required depth as accurately as possible!

For ease of work, some craftsmen use the following secret. A small magnet is glued to the side of the screwdriver body, onto which you can attach several self-tapping screws that will be immediately at hand. This greatly simplifies the work, for example when working at height.

What interesting secrets of using a screwdriver do you know?

Fantasies on the theme of shortened length

Products with shortened lengths very accurately fall into modern trends. This means that, armed with scissors, you can turn any thing into a fashionable novelty. Moreover, you shouldn’t worry about a slightly sloppy edge - this will only give the clothes some flair. You can start such experiments with a loose or men's T-shirt. The action plan is simple - cutting the hem and rolling up the sleeves.

A few simple movements with scissors and a simple T-shirt can be turned into a trendy cropped top. A great addition to stylish summer looks!

The shortened length can be easily complemented with long ties (which can also be obtained from the original T-shirt).

It's also easy to create fashionable crop tops from old T-shirts and T-shirts.

Your scissors can also touch jeans with a loose fit - such products are now very popular in a shortened length with a raw hem.

Lacing

Fashionable lacing can also become a source of your inspiration.

Interesting: Firming face masks

https://youtu.be/https://youtu.be/0VZYMKIJDHE
_