A cranberry harvester is a small, convenient device that can be used to collect berries much faster and with better quality than the classic method - by hand. It is recommended for every cranberry picker to have. You can simply purchase a combine harvester, since they are produced by industry and are commercially available. But you can also make it yourself, with your own hands from available materials, it is not difficult and does not take much time.
Container for collecting berries - description and general characteristics
If anyone has communicated with professional berry pickers, then they could notice that the tray for collecting berries (lingonberries, blueberries, cranberries) is their faithful friend and assistant. These are people who annually walk many kilometers, not always along convenient paths. But they always take a scoop with them for picking berries. There are several important reasons for this. A container for collecting berries increases productivity. And that's why:
- a rake for collecting lingonberries and blueberries reduces the load on the spine. For those berry growers who have a weak back, such a device will be a lifesaver;
- A plastic fruit picker with a shutter for collecting blueberries and lingonberries weighs very little. Working with it your hands don’t get so tired.
What types of hand tools are there for picking berries?
First of all, it should be noted that in common people this equipment is called by different names. Its name depends on the area where such fortified plants grow. These places are sometimes located in hard-to-reach but beautiful places. Therefore, a blueberry scoop may have the following names:
If you heard one of these words in a conversation on the topic of picking berries, know that the topic of conversation is a device for picking blueberries and lingonberries or some other berries.
There are still many amazing and beautiful names this equipment can have. What type of container can this be? What material is it most often made from?
As you can see from the names, each such container resembles a small box. Its dimensions are almost standard and over a long period of evolution, all unnecessary elements in it have become a thing of the distant past. Now each such device consists only of:
- bunker,
- teeth,
- pens.
Typically, a harvester for picking blueberries and lingonberries is not made from solid material. That is, we are talking about a bunker. To keep debris such as leaves and small dry pieces of twigs out of it, slots are made at the bottom and sides of the hopper. Moreover, it is of such a size that the berries themselves do not wake up. The same can be said about the distance between the teeth. Everything is thought out in such a way that the berries remain in the harvester, and the garbage is sifted as much as possible during the collection process.
I would like to draw your attention to the fact that there is a small, but very important difference between a scoop or ladle and a container. A ladle is an open apparatus or container. The container has a closed top.
As can be seen from the listed names, sometimes the fruit collector for blueberries is called a rake. This is because they attach a long handle to it. This allows you to avoid deep bending of the body during the collection process. Again very convenient.
Another very important detail. The name of the device, Fruit picker for collecting berries with a shutter, contains another new word. What does a fruit picker with a shutter mean? And what is it for?
When the device has a partition in the middle that rotates freely when the angle of inclination changes, it is a combine harvester. And the partition acts as a damper, which prevents the berries from spilling onto the ground, with the fruit picker tilted with its teeth down. Therefore, a berry harvester with a shutter is valued by professionals more than a simple comb.
And one more characteristic is the material of manufacture. Berry picker for blueberries and other fruit pickers come from:
- plastic,
- metal (steel),
- tree.
Galvanized food grade steel is used to make berry pickers. Another option is a wooden body with metal teeth.
Each design has its own pros and cons:
If your children also take part in trips to harvest healthy vitamins, then special plastic fruit collectors have been produced for them.
Apart from how to choose a harvester for picking berries, there is not much information about the fruits themselves.
Time and rules for picking berries in the forest
In order to successfully go berry picking for the first time, you need to go with experienced berry pickers. But it wouldn’t hurt to have a little information about the plants themselves and how to collect them correctly.
One of the first rules you need to know:
And that's why. When the berry grows low near the ground, you can pry it up with a scoop and grab the ground. If the branches of the bush are tightly intertwined, the sharp teeth will be difficult to release when combing. And the berry picker will be full of leaves and pieces of other foreign matter.
More about cranberries
One of the most useful berries. One phrase cranberry juice evokes associations associated with vitamins and healthy food. And in confirmation of the fact that everything that is most useful and correct does not come easily, cranberries grow in wetlands and are not easy to collect. Even when you find yourself in a cranberry meadow, it is difficult to determine at first glance how many berries there are. Since cranberries often hide under densely intertwined branches level with the soil. Therefore, in order to get them all, you need to work hard. This is where a cranberry harvester is so necessary.
More about blueberries
How beneficial blueberries are has long been known not only in Rus', but throughout Europe. But the largest areas in which it grows are located in Russia. And yet, it does not grow in the south. This is a heat-loving, but northern plant. Its beneficial properties have always been valued. Therefore, for healthy and clean blueberries, you need to go to the forest and collect them with a fruit picker.
More about lingonberries
Coniferous forests, rarely deciduous ones, can boast that such a storehouse of vitamins grows on their territories. Altai Territory and Novosibirsk Region, places where it grows. There are many people here who want to follow her, and there is enough of her for everyone. All you have to do is buy a manual harvester for collecting lingonberries, and you’re off. Ripens by September and grows on low growing bushes.
But you don’t have to go far to pick strawberries. It grows in forests and on sunny slopes of hilly areas.
There was a time when fruit collectors for berries were made by hand. But today there is no need to waste time on this.
A manual berry picking machine does not damage berry bushes if used correctly. Therefore, ordering a berry harvester and buying it will be the right decision if you are going for such fruits this berry season. You can buy a manual harvester for picking blueberries and other berries in the online store. You don't even have to travel far. This is our 21st century.
Factory-produced berry harvesters began to appear on sale not so long ago. Previously, such structures were made in workshops. Despite the fact that it is now easy to purchase a device, home craftsmen still try to make them themselves.
What is a berry harvester?
Harvesters used to harvest blueberries consist of a body with a handle, the bottom of which is made of wire and equipped with a “comb” of rods. The combine looks like a scoop; its size can be large or small. To prevent the berries from spilling out during picking, a special curtain is installed on hinges in the front part of the body, which should cover the cross-section of the body. In the upper part, it is movably fixed in the sides of the body in such a way that when raking berries inside, it turns and opens a passage for them.
How to pick blueberries with a combine harvester
In order to properly clean wild bushes, you need to familiarize yourself with the main points: is there a ban on the use of special devices, is there liability for their use.
Is it possible to harvest blueberries with a combine?
It is prohibited to use a blueberry scraper or other suitable device in the territory of the former Soviet Union. Since these devices severely damage the bushes and their branches, and they require a long period to fully recover.
Modern designs have a more gentle operating mode and do not injure wild bushes. They are officially allowed in Sweden and Finland. Norwegians also actively use them.
How to make a harvester with your own hands
First we make the bottom with a comb. Cut a rectangle of 100x400 mm from tin. Prepare rods from wire or knitting needles with a length of 100 mm. It is better to bend the sheet at one end to form a hard edge - about 5 mm. At a distance of 40 mm from the edge, draw a line perpendicular to the long side of the plate and drill a series of holes along it, the diameter of which is equal to the diameter of the rods.
The ends of the wire rods should be given an oval shape, so they will pass through the bushes more easily and will not pierce the berries.
The first and last rods should be flush with the edges of the plate - they will then need to be soldered to the sidewalls. The distance between the teeth is 3-4 mm. We bend the end of the plate along the line of the holes by 90 degrees to create a side that will prevent the berries collected by the “comb” from rolling out. We insert the rods into the holes and fix them - for this you can use a wooden strip in which holes are drilled with the required pitch. It is better to solder the rods to the base for structural rigidity.
Now it's the sidewalls' turn. We cut out two blanks - their length should coincide with the resulting bottom, choose an arbitrary height that will be most convenient for work. We bend the edges 90 degrees inward and solder the bottom to these folds. It is also necessary to solder the outer rods to the sidewalls - this will give the structure additional rigidity.
You can also solder a folding curtain to the inside of the sides to prevent the berries from spilling out.
Fold a suitable tin blank in three or four - you get a strip that needs to be bent into the shape of a handle. We solder its ends to the sides. Additionally, you can wrap it with electrical tape so that the handle does not rub your fingers.
The blueberry picking device allows you to harvest a much larger harvest
In the summer, picking berries is one of the favorite pastimes of summer residents and gardeners. There are many devices that help greatly facilitate and speed up this process. To understand how to make a harvester for picking blueberries, lingonberries and strawberries yourself, let’s look at the features of picking berries.
Peculiarities of picking blueberries and strawberries
Picking blueberries and wild strawberries is a labor-intensive and painstaking process. The berries are small, the bushes are low and grow densely. Harvesting by hand is incredibly difficult—you literally have to pick one berry at a time from all the greenery. In this case, you need to stand bending towards the ground.
Blueberry picking
Most often, blueberries are found in pine and small-leaved forests. Finding a berry bush is quite simple: a clear sign of the presence of shrubs is a wild plant - wild rosemary. It has a distinct smell, which will become your guide.
There are also cultivated varieties of blueberries that gardeners grow in their summer cottages. The bushes of such plants are taller, but less common, and the berries are larger, and therefore it is much more convenient to collect them than forest ones.
Bushes can reach an age of 40 years. The oldest ones occupy a large area and have a spreading shape. They bear a lot of berries, but they are smaller than those on young plants.
The most delicious and healthy fruits grow on young animals, whose age does not exceed 10 years. They have thin green twigs, and thick side branches are practically absent.
It is recommended to collect blueberries in small plastic buckets or baskets. It is not worth pouring the harvested crop from one container to another, since the berries, although strong, are easily damaged. You should not pick blueberries after rain; it is better to choose dry morning weather.
Collection of forest and garden strawberries
Picking strawberries also has its own characteristics. Both a wild forest and a garden berry, it loves well-lit, open areas. Ripe and ready-to-eat fruits have a bright red color and are easily separated from the stalk.
The fruit cups can be removed immediately, or the berries can be sorted later. The best time to pick strawberries is in the morning, when the dew has dried. The fruits must be collected in small containers of 2-3 kg. It is not recommended to overspray; the berries are soft and easily damaged.
How to pick blueberries
The process of harvesting berries, if done without a blueberry picker, takes a lot of effort and time. To improve it, assemblers come up with various devices and devices to speed up the process.
To obtain the most positive result, you must follow the following recommendations regarding harvesting small berries:
- Work should begin in July, when the blueberries are fully ripened and have reached technical ripeness. By this time, you need to prepare containers and berry collectors for blueberries.
- The lifespan of bushes is about 20 years. It is more effective to pick berries from plants that are no more than 15 years old. In such fruits the percentage of useful substances is quite high.
- Only ripe fruits that are blue-black in color should be harvested. If you pick unripe berries, you shouldn’t expect them to ripen. And overripe specimens will disappear very quickly.
- According to observations, the best time to pick blueberries is during the full moon. Such berries have a high taste, but they should be consumed quickly; they will not last long. In order to collect the fruits for long-term storage, work should be planned in advance for the full moon.
- The optimal time for harvesting blueberries is morning and evening hours. The weather on the day of collection should be dry and cool.
- It is best to use wicker baskets with holes for ventilation as containers. Alternatively, you can use plastic containers and boxes.
Picking blueberries is faster and easier with the help of special tools. Tip!
You can determine the approximate age of a plant by looking at its branches. An adult bush has a large number of lateral shoots. Among avid forest lovers, there is an opinion that blueberry picking devices severely damage fruit branches. With this approach, plant productivity indicators are noticeably reduced.
Factory-made blueberry harvester
A scoop for picking blueberries is the simplest and most popular device among lovers of this berry. Despite its simplicity, it performs its functions perfectly and speeds up berry picking by 3-4 times.
A ready-made combine is not expensive at all, and therefore is very popular. You can buy it at both hardware and gardening stores. The device has several names: a scoop or berry harvester, a fruit picker, and a berry picker.
The device for collecting blueberries is a parallelepiped-shaped container, on the bottom wall of which there are long curved teeth, reminiscent of a comb. With their help, the bushes are literally “combed out.”
The distance between the teeth is approximately 5-6 mm. Thus, the branches and leaves of the bush pass freely between them and remain undamaged, and the berries are carefully removed and fall into the rear compartment of the scoop.
There are various factory-produced models and those made by yourself. The material used for the body is plastic, metal or wood. Wire is almost always used for the teeth.
Harvesting blueberries with a combine video
Manual blueberry harvester video
Harm of mechanized berry picking for berry bushes
Devices for collecting fruits make work 2-3 times easier and faster, which is why they are actively used by harvesters. Handmade tools injure bushes if certain rules are not followed during their manufacture.
Devices are considered safe if there are no sharp cutting edges and the ends of the teeth are rounded. The comb does not scratch the stems during operation. The gap between the spokes is optimal, allowing leaves and branches to pass through, but delaying fruit.
Devices that do not meet these requirements are considered poaching devices. The Ministry of Natural Resources is fighting against their use. With a barbaric attitude towards nature, the productivity of berry fields decreases, and it takes years to fully recover. In Russia, Ukraine, and Belarus, collectors are fined for using poaching hand-held devices.
How to make a blueberry harvester with your own hands
A simple device can be easily made from available materials. Leftovers and trimmings of boards a few mm thick are suitable for this:
- prepare paper patterns of all parts: 2 side and 1 back wall, top, bottom, handle, part with teeth;
- place the patterns on scraps of wood, trace the outline and cut out;
- connect the parts with nails.
A homemade blueberry harvester may have teeth made of thick wire. It is necessary to make several long loops and secure them to the bottom of the device. To learn how to do this, watch the video.
Wooden blueberry harvester video
Convenient combine harvester with a handle for picking blueberries video
The most affordable way to quickly make a device is to use a plastic bottle as a base. Before making a scoop for collecting blueberries, the bottom of the container must be cut off.
If you cut the teeth out of plastic, they will be soft and you will not be able to comb out the bush. To do this, use wire. You can easily bend 8-10 cloves out of it and attach them to a plastic base. This homemade scoop is light and convenient, and it only takes a few minutes to make.
Manufacturing instructions
From funds found at home, homemade devices for collecting forest gifts are made without drawings. The dimensions and shape of the devices determine the dimensions of the plastic products (bottles, containers) from which the bucket is made.
More complex products made from materials such as metal, wood, plywood are made strictly according to the scheme. First, patterns of all parts of the device are drawn on paper or cardboard, then they are transferred to metal or plywood sheets.
From sheet metal
A step-by-step description of the process of making a blueberry harvester with your own hands will help you in your work:
- take a galvanized sheet and apply the contours of the bucket body parts onto it according to a template;
- cut out all elements of the future design with metal scissors;
- Cut rods from wire (1-3 mm), at the comb of the scoop they will be the bottom and teeth;
- connect the body parts with rivets;
- Attach a curtain inside to the hinges; it will prevent the fruits from spilling out when picking;
- make a handle from a piece of pipe, flatten the ends and rivet them to 2 bent strips;
- Rivet the holder with handle to the body.
For the berries, sew a bag from coarse fabric and attach it with thin wire or rope to the body of the bucket. Bend the spoke teeth of the comb smoothly upward. How to fix the comb spokes is worth considering in detail.
Note! To make the hand comfortable, the steel handle is wrapped with several layers of electrical tape.
First, cut out 2 strips of galvanized steel, 3 cm wide and equal to the width of the comb. Fold each strip in half and cut 2 cm from each side of one half. On the fold, mark locations for holes with a pitch of no more than 5 mm.
Make cuts exactly according to the markings using an emery wheel. Insert wire into the holes of the first and second plates and solder them so that they do not fall out. Using a chisel and hammer, shorten the spokes to the same length and bend them.
Made of wood
Make a device for collecting berries from thick 9 mm plywood. Make a comb from old bicycle spokes or 3 mm wire. Place the templates of the body parts on a sheet and outline the contours. Using a jigsaw or hacksaw, cut out the blanks strictly along the drawn lines.
To make a comb, take a 18 * 18 mm strip and cut 2 bars. On each, along the center line, mark the locations for the holes with a pencil and drill. Maintain a distance of 5 mm between adjacent holes. Make comb teeth from wire:
- cut into equal pieces;
- bend each rod in half so that the edges of the teeth are rounded and do not injure the stems when harvesting;
- insert wire blanks into the holes of both bars.
Bend the comb teeth to the desired angle. Assemble the bucket parts according to the diagram. Attach the door handle to the upper wall of the housing.
From a plastic bottle
You can make a ladle from a plastic bottle in the forest if you have a knife, string and a marker with you. The volume of the container does not matter - the more, the better. The workpiece must be placed on the ground on the side that faces up, and the outline of the hole must be drawn. It should repeat the silhouette of the English letter “W”. Use a knife to cut a hole.
Make a stick of the required length from a thick branch. Attach it to the neck of the bottle, secure it with a rope or several layers of electrical tape. The instructions for using this comb are simple:
- holding the stick, pull the device through the bushes;
- sharp edges will cut off the fruits, which will fall into the container;
- Pour the berries into the bucket through the neck, having first unscrewed the lid.
It is better to make the hole closer to the bottom, the plastic in that place is denser, the edges of the teeth will be harder.
From a canister
To make the body, take a canister with a volume of 1-2.5 liters. Make the part without a handle the bottom. Cut teeth and transverse slots in it to filter out debris. For convenience, draw all the lines on the canister with a marker.
Cut holes with a construction knife. Maintain the standard interval between the knitting needles – 5 mm. When picking fruits, hold the scoop by the handle. To save time on pouring berries into the body (bucket), attach a bag or fabric bag to the opening of the canister with electrical tape.
Device for picking strawberries: truth or myth
Today, forest and garden strawberries have to be picked manually. The wide, three-lobed leaves do not fit between the teeth of the combine and are often torn off. Using the previously described scoop to collect strawberries, there is a high probability of damaging the tendrils with young bushes extending to the sides, and the berry itself is soft and easily damaged.
When growing strawberries on an industrial scale, producers use modern high-tech machines. A strawberry harvester is an expensive and fairly large piece of equipment. To use it, you must respect the shape and height of the ridges. The use of such equipment in a small private household does not pay off.
Industrial harvester for collecting strawberries video
A device for picking strawberries is the dream of many gardeners and foresters. Therefore, to increase sales and for advertising purposes, the blueberry and lingonberry harvester is credited with the ability to harvest strawberries. The problem is that many people believe this, and in the process spoil the berries and harm the plant.
Trial device for picking strawberries video
In an attempt to make the process of picking strawberries easier, craftsmen use all their ingenuity. This video shows a simple do-it-yourself device, with the help of which craftsmen will try to speed up the berry harvesting procedure, but the quality of the harvest will most likely be spoiled.
Similar designs: rakes, scoops, shovels, combs and others
The principle of “picking” berries from herbaceous bushes is implemented in some devices, either simpler in design, or designed to further simplify the work of the picker.
For example, the simplest options are ordinary wooden scoops with long teeth on the leading edge:
Some of their options are simplified as much as possible:
And some homemade models strike an excellent balance between simplicity, cheapness and functionality. For example, here's a combine:
It is made of wire, thread and a bag, but is very compact and is not inferior in ease of use to industrial options.
In these cases, the typical combine design is simplified for the fastest possible production. However, these options have their drawbacks. For example, the scoop has low sides and if accidentally tilted, the berries easily spill out of it. And wooden ladles get dirty quickly.
In other cases, inventors are working to make it possible to use a harvester to pick berries without bending over or crawling through the forest on your knees. The simplest option in this case is a special rake:
They can be used to comb the bushes without bending over, from time to time pouring the collected berries into a bucket.
A more complex option is to combine a rake and a combine. Simply put, the combine has a long handle that allows you to change the angle of the bucket itself. The video shows an example of such a device:
And, by the way, please note: even such complex designs can be made with your own hands. And if manufactured correctly, the resulting combine will be no worse than an industrial one
Therefore, it is worth saying a few words about how to correctly implement the basic principle in such a product.
Bottom line
Today there is a lot of information on how to make a device for picking blueberries, but such combines and scoops are not suitable for strawberries. Engineers and craftsmen are constantly inventing something new, and perhaps a device capable of picking delicate berries will soon appear.
All experienced gardeners prepare for the arrival of summer in the spring. Some people buy gardening equipment in stores, while others make their own. A berry harvester is an indispensable assistant for every garden owner. With its help you can quickly collect fruits in large quantities. Let's take a closer look at the design features and how to make a berry harvester with your own hands.
Similar designs: rakes, scoops, shovels, combs and others
The principle of “picking” berries from herbaceous bushes is implemented in some devices, either simpler in design, or designed to further simplify the work of the picker.
It is made of wire, thread and a bag, but is very compact and is not inferior in ease of use to industrial options.
In these cases, the typical combine design is simplified for the fastest possible production. However, these options have their drawbacks. For example, the scoop has low sides and if accidentally tilted, the berries easily spill out of it. And wooden ladles get dirty quickly.
And, by the way, please note: even such complex designs can be made with your own hands. And if manufactured correctly, the resulting combine will be no worse than an industrial one
Therefore, it is worth saying a few words about how to correctly implement the basic principle in such a product.
Scheme and materials
Before you make a berry harvester, you need to prepare a certain set of tools and materials. In general, such a device is similar to a regular scoop, but it has a different purpose.
To work you will need:
- sheet of steel material;
- fasteners;
- tree branches;
- metal wire;
- drill.
The device acts as a body with an additional handle and a bottom, as shown in the drawing. The design has a comb, which eliminates the possibility of fruit falling out during the assembly process. There is also a special partition, thanks to which you can harvest in large quantities. A handle is fixed to the upper area, providing comfortable working conditions.
The main part consists of plywood or plastic material, all other components are made of wire.
Option one - manufacturing stages
Before you make a blueberry harvester, you need to correctly calculate all the dimensions and create a construction diagram. As a last resort, you can use a ready-made solution, which is provided on our website.
- From purchased plywood, durable plastic or metal sheet, cut out the main body and bottom of the berry harvester.
Plywood base
- Next you need to make the remaining components of the comb. For this, 3 mm wire is used. Make the required number of 10 cm pins.
- On one side it is necessary to fix the galvanized steel.
Proportions and dimensions of the device
- Create several holes, their diameter should be equal to the cross-sectional size of the rods. The holes must be located on the side of the platinum. Set the teeth in 4mm increments.
- Make a small bead by bending the end of the plate. Secure the rods in the holes with wood slats. Solder the wire to the base of the blueberry processor.
- Bend the edge at a right angle into the inside of the device. The bottom will be fixed to this part. It is necessary to create stiffening ribs along the side. Place the handle here.
A manual blueberry harvester will serve as an indispensable assistant in this process. The steel device is practical, resistant to mechanical stress and durable.
Option two
This method involves making a do-it-yourself blueberry harvester from wood. To work you will need:
- skewers for cooking kebabs;
- large tree branches with a diameter of 100-120 mm;
- saw;
- adhesive composition;
- chisel;
- drill.
Taking into account the diagram and given dimensions, cut two identical circles with a small thickness from the wood blocks.
Step back 1 cm from the edges and at this distance make holes along the entire circumference on two parts.
The cross-section size must fully correspond to the diameter of the skewers. All holes should be located at a distance of up to 5 mm from the previous ones.
Using a drill, we make through holes where the skewers should fit. The distance between the holes depends on the size of the berries - the larger the berry, the greater the distance
The result will be a convenient hand-made berry harvester made by yourself.
The easiest way
The simplest collection is made from a thick plastic bottle. Use opaque plastic containers for ketchup, kefir or milk. Such a tank fully complies with the required strength indicator and is easy to work with. The bottle should be small in size and have a wide neck for quick and easy removal of the fruit.
How to make a collection from plastic containers:
- mark the location of the hole on the bottle;
- fix the stick on the device so that it ends near the bottom of the container and protrudes on the other side;
- A square-shaped hole is cut along the mark, but large teeth are made on one side, near the bottom.
A homemade fruit picker made from improvised materials is ready for use.
VIDEO: How to make a convenient device yourself
Rating of the best models of berry harvesters
Among the large abundance of offers, we can highlight a separate list of models that are distinguished by durability, convenience and additional features. The list was compiled based on consumer reviews.
Alko
This is a high-quality device for picking berries, the price of which is fully justified by its long service life. The design consists of a comb, a bag and a handle holder. All components are made of plastic and textile.
High-quality Alko harvester with a removable handle and a bag for collecting lingonberries, blueberries, cranberries
The device is used for various fruits of small diameter:
- cowberry;
- gooseberry;
- currant;
- blueberry;
- sea buckthorn;
- cranberry.
As for the features, they consist in the possibility of folding the handle and attaching it to a belt or backpack. The price of the device is 2900 rubles.
Pigasov combine
This is a more budget option compared to the previous one. Its price is 890 rubles. The device consists of metal sheet material and galvanized wire, which acts as a comb.
Harvester for collecting blueberries and lingonberries
The device is completely covered with glossy paint. A hand picker has been successfully used for blueberries, currants, and rose hips. The model weighs 0.4 kg, dimensions 12x24.5x8 cm, all comb rods are spaced at intervals of 5 mm.
VIDEO: Review of the operation of Pigasov’s product
Bug
This is a plastic version, which is designed for more gentle use.
Fruit collector "Beetle" with shutter
The cost of the model is 350 rubles. It is used for cranberries, blueberries and lingonberries. The dimensions of the collection with a comb are 13x23x15 cm.
Harvester K-1
The metal device of the domestic manufacturer stands out for its increased reliability and durability. This device can be used exclusively for cranberries.
During operation, the berries will be collected into the container intact and without losing their original appearance. Price - 690 rubles.
