❆ Master class. Illuminated and simple Christmas trees on plastic wine glasses (lace and nylon) ❆. Discussion on LiveInternet

For people who are concerned about the preservation of forests and are opposed to the use of natural trees for the New Year holidays, this version of the Christmas tree can be very useful. not the best option for a house or apartment, but for a courtyard area it will be a good decoration for the holiday.

To make such a Christmas tree you will need a sufficient number of plastic bottles of various capacities: from 2 liters to 0.5 liters. It is desirable that all bottles be green, although not required.

You will also need a wooden base for the future tree. This, of course, is a traditional cross and a round post with a diameter of 60-80mm attached to it. The height of the rack is selected depending on the scope of the project and the number of bottles collected. You will also need a screwdriver or screwdriver and about fifty 30mm long screws.

So, how to make a Christmas tree
from bottles with your own hands
? The most capacitive containers of 2 liters are placed on the first row of bottle branches. The corks are twisted from the bottles selected for this section of the tree and secured in a circle at the bottom of the wooden stand, marking the first bottom row. Each plug is applied to the barrel with the thread facing outward, and screwed through the inside with a screw.

Then the bottles are screwed into the corks. If something doesn’t work out right the first time, it’s not a problem to rearrange the plugs to a more advantageous position. Leave a small gap from the bottom row of bottles to the ground. The first row will contain 9-10 bottles.

Bottles with a smaller capacity of 1.5 liters are selected for the next row. It is more expedient to place them above the spaces between the lower bottles, that is, in a checkerboard pattern. This must be done for thickness and a more aesthetic appearance. The thicker the tree, the better it will look.

So, step by step, reducing the container capacity, you need to move to the top of the artificial tree. The topmost bottle with a capacity of 0.5 liters should be attached vertically with the neck down. First, cut off the bottom and tightly insert a shiny Christmas tree ball of a suitable size into the middle of the bottle.

You can decorate the remaining “branches” with balls. They simply need to be attached to the bottom of each bottle using glue. The recess in the bottom of the bottle is very convenient for such an operation. It is realistic to use ordinary construction liquid nails as glue. If the convex part of the ball with a loop for the thread gets in the way, then you should drill a hole with a diameter of 10 mm in the bottom of the bottle and, during the gluing process, direct the protruding part of the ball into this hole.

It is possible to make such a tree from identical bottles of the largest sizes. You will just need to cut off the bottom of the bottles and shorten each subsequent row even more. You can even cut the bottles at an angle to create the perfect conical shape for your spruce tree. In this case, shiny balls will have to be inserted inside the bottles.

Further decoration of the Christmas tree has a lot of options and will depend on the imagination of its creators. There are also many other options for creating a Christmas tree from empty plastic “containers”. And clearly, how to make a Christmas tree from bottles with your own hands

, these videos will introduce you.

Make a Christmas tree with your own hands, cheaply, cheerfully and, in addition, quickly? This is possible, especially if you have some plastic containers - bottles or cups - accumulated in your house.

We present to your attention a double detailed master class: how to make an exclusive New Year’s building from recycled materials with your own hands.

Master class 1: Christmas tree made from plastic bottles

We will need:

plastic bottles of different sizes, from 0.3 to 3 liters. Preferably green;
a wooden stick, the height of which is the same as our Christmas tree. The diameter of the stick should be slightly smaller than the diameter of the neck of the bottles;
bottle cap;
stationery knife;
scissors.

Stage one:

Carefully cut off the bottom of all plastic bottles. Carefully, use a stationery knife - first you need to make a puncture in the wall, and only then saw around the circumference. If sawing with a knife seems difficult, then you can cut with scissors. We leave one large bottom - it will serve as a support on which the Christmas tree will rest. The remaining bottoms can be thrown away.

Stage two:

We cut bottles with sawn-off bottoms into strips 2-2.5 cm wide, naturally, without bringing the cut to the neck. As a result, we get a kind of plastic “flower”.

Stage three:

We cut each strip along the edge, leaving a distance of 0.5 mm between the cuts. These are our “needles”. This way we will be able to make the future Christmas tree “fluffy”. We bend each “needle” - the branches turn out “lush”.

Stage four:

We carefully string the branches onto a stick with our own hands - this is how the Christmas tree is assembled. Wider blanks (from larger-volume bottles) will naturally be at the base, and smaller ones (bottles of smaller capacity) will be at the top. We put the bottom of the bottle on a stick, this will be the base on which the tree rests. We screw the cap on top, you can hammer in a nail for strength.

Christmas tree made from plastic bottles is ready! Decorate! Tinsel, rain and simple matte balls will look great on such a unique New Year's beauty. A garland on an ascetic plastic tree can also look very stylish. Experiment!

Master class 2: how to make a Christmas tree from cups

The most difficult thing in this procedure is perhaps finding green cups.

We will need:

plastic cups;
stapler;
glue;
toys, balls for decorations.

Stage one:

We place eight cups in the first row with our own hands, in a semicircle. We fasten them with a stapler. Then we put the second row on top - already seven cups. We also fasten them with a stapler. And so on, each row is one glass less. The rows can be lightly glued together for reliability, and also secured with staples. The finished tree should be stable.

Stage two:

Place a toy or ball in each cup. You can drip a little glue so that they are securely fixed inside. By the way, if you have a special glue gun, great, it will help you discreetly attach toys to plastic.

The original Christmas tree made from plastic cups is ready! But if you think that this idea is not creative enough, then here are options for decorating or modifying such a structure with your own hands:

You can lay out the cups not in a semicircle, but in a circle. Only in this case is it better to “plant” them on a base made of a cardboard cone. Such a tree will have an attractive “facade”, that is, it can be placed in the center of the room, while a semicircular one looks good when standing against the wall.
If you make a small cut in the top of each cup, you can pass a ribbon through it, secure it with a knot, and hang the decoration on it.
Macaroni bows painted with golden gouache will look great as decorations.
You can place a garland inside a round Christmas tree made from cups. It will shine very beautifully through the plastic, and its top light bulb will perfectly replace the traditional star.

Do you think it’s impossible to make a Christmas tree with your own hands from an ordinary plastic bottle? But no! And now we will prove it to you. By the way, such a New Year’s tree looks quite decent and very cute! A plastic Christmas tree can be placed anywhere: at least on the kitchen window, at least on the bedside table near the TV, or at least on the children's shelf next to toys and books. So, let's get to it?!

Materials and tools for.

DIY Christmas tree made from plastic bottles. Master class with step-by-step photos

DIY Christmas tree made from improvised materials. Step-by-step master class with photos.

Author: Elena Yuryevna Koroleva, vocational training teacher, Nikolskaya boarding school for children with disabilities in the Kostroma region. The master class is designed for children of senior school age and teachers. Celebrating New Year and Christmas in every home is not complete without a beautiful spruce tree. She is the harbinger of this joyful event; adults and children await her appearance. You can make many different Christmas trees with your own hands, I will share my creativity. Purpose: The New Year tree is an integral attribute of the New Year and Christmas celebrations. Goals: Make a Christmas tree with your own hands. Objectives: - learn to crochet plastic parts; — development of creative abilities, imagination, taste; - instilling accuracy in work - instilling interest in making crafts with your own hands. For work we will need the following materials: 1. Green plastic bottles; 2. Brown or green beads 20-25 pcs; 3. Metal stand - base; 4. White threads for knitting, preferably “Elashes” 100 g; 5. White padding polyester 15*15 cm; 6. Glue moment crystal. Tools: 1. Scissors;
2. Shilo; 3. Hook; 4. Sheet of rubber. Progress:

1. Prepare templates No. 1 - No. 7 - tree branches, No. 8 - crown.

2. Cut straight parts from the bottles.

3. Gently iron through the fabric with a warm iron.

4. Using an awl, use an awl to draw the outline of the twig and puncture sites. Instead of a rubber sheet, you can use thick or dense cardboard.

5. Expand the puncture sites with an awl so that the hook and thread pass freely. You can pierce with a hot awl, but in this case the holes are of different diameters.

6. Cut the part along the contour.

7. Prepare branches according to templates No. 1-7, 10 parts each, part No. 8—2 parts.

8. We begin tying the branches from the base, from left to right. It is easier to tie from the “spike” side when the hook and loop comes out from the side of the awl puncture. Those. we pierce the part with an awl on one side, when we tie it, we turn the part towards ourselves with the other side. We make a loop on the thread and bring it through the puncture.

9. We bring the thread through the loop.

10. We bring the thread out of the next puncture, then through two loops. You can make one loop in each puncture along a straight cut and 3 loops along a curved cut.

11. We tie each branch separately.

12. Cut the parts of the crown to the middle, one on top, the other on the bottom. We tie it up. Leave the ends of the threads 3-4 cm.

13. We begin to collect. Another master makes the base for my Christmas trees, but you can make it yourself. This process was described by me in the master class “Christmas tree from a substrate”, published earlier on my blog.

14. Cover the stand with padding polyester and put on 4 beads.

15. Prick 5 branches of part No. 1. Spread the parts evenly in a circle. First row. To fix the branches, you can glue each row with glue at the “trunk”

Put on 2-3 beads, the next 5 parts No. 1, distributing them between the branches of the first row. The second row is ready.

Put on 2-3 beads, pierce 5 branches of part No. 2, distributing them between the branches of the second row, etc. (If the Christmas tree becomes very thin or tall, reduce the number of beads to 1 between rows of parts No. 4.5)

16. Insert two parts No. 8 into each other and fix them on the top of the tree with glue, close the wire with the ends of the threads.

The Christmas tree is ready.

The work is quite labor-intensive, but I think 4 days were not wasted.
The Christmas tree can be quickly disassembled and does not take up much space when stored. I wish you all creative success and a festive mood.

We recommend watching:

DIY paper Christmas tree. Master class with step-by-step photos DIY New Year's crafts from waste material DIY New Year's tree using the kanzashi technique. Master class with step-by-step photos DIY Christmas tree. Master class with step-by-step photos

How to make a Christmas tree from plastic bottles?

To make such a fluffy beauty, take:

green plastic bottles;
scissors;
scotch;
a wooden stick, the diameter of which is slightly smaller than the hole in the neck of the bottle.

Prepare containers by removing labels and washing them.
For each bottle you need to cut off the neck and bottom, cut the rest into several rectangles, chop them into strips, but not completely. Trim the shoulders of the bottle, leaving only the neck. You will put a wooden stick into it. Starting from the bottom, attach the blanks from the bottle here so that the fringe points up. We decorate the entire trunk, and attach a small part on top, which will become the top. The blanks must be fastened in such a way that the largest ones are at the bottom and the smallest at the top.

Here's what else a Christmas tree made from plastic bottles can be like.
Making one with your own hands is also quite simple. To reproduce this masterpiece, take:

green plastic bottles;
scissors;
a wooden stick of a suitable size.

Remove the labels from the bottles and proceed with the blanks as follows: cut off the bottom, cut the remaining part into 10 identical strips, almost reaching the shoulders of the bottle.

Now you need to make diagonal cuts on sides 1 and 2 of each tape. Fold the resulting fragments over one another.

Take the bottom of a large bottle, make a hole in it, insert the neck of the bottle into it, into which a wooden stick is inserted.
Secure this part of the structure with a cork by screwing it onto the neck. Place pre-made parts on the stick, starting with the largest bottle and ending with the smallest one.

If you threaded all the parts onto the barrel with the neck down, then place the last one with the neck up. Secure the tree by placing a lid on the top of the tree.

The result was a wonderful tall tree made from plastic bottles. From this container you can make an even larger tree by placing the bottles, for example, on a mop.

If you want to make a cone-shaped tree, then roll a piece of paper or cardboard in this way. Cut off the neck of the bottle and insert a paper blank here. Cut trapezoidal fragments from other parts of the container. Chop the longest edges of each piece into equal strips, not reaching the top 2 cm.

Secure these elements with tape, arranging them in ascending order, starting with large and ending with small.

This is what should happen in the end.

If, for example, you work in a grocery store, then you can put up a large Christmas tree made from plastic bottles, which will certainly attract customers. To do this, you need to arrange the bottles in a circle in rows, and place plywood circles on them. Each subsequent tier is smaller than the diameter of the previous one. There should be 3 bottles left closer to the top; place a star on top.

Even empty plastic bottles will become an excellent decorative element. You can backlight it so that the trees sparkle attractively at dusk. Other waste materials will also become a picturesque Christmas tree.

How to_make_a Christmas tree_from_plastic_cups

Irina Ivanova

Christmas tree made from plastic cups

Any options and methods of artistic skill contribute to the comprehensive development of children, so the more diverse creative tasks you can offer your child, the better and faster his imagination, ability to analyze, and solve assigned problems will develop. From this point of view, crafts made from plastic cups . The material is cheap, bright, and easy to process. It provides a wide field for creative activity. Choose your favorite ways of working and souvenir options. Spend time with your children fun and usefully.

To make children's crafts dedicated to the New Year , sometimes the most unexpected materials are used. In particular, boys and girls can make original New Year's accessories from plastic cups . In our article you will find some interesting ideas.

First, you need to decide on the size of the Christmas tree and then purchase the required number of plastic glasses . You also need to pay attention to the color of the glasses , the most preferable in this case will be green glasses .

Plastic cups are different in size , let’s decide on that too.

Start assembly (manufacturing)

Christmas trees need to be from the first row.

The glasses are attached to each other, with their sides close to each other.

Second row, there are fewer glasses than in the first , for example (it all depends on the size of the tree)

the first row is 5
glasses , the second is 4, etc.
The fastening is the same, the second row is attached to the first.

Following the same principle, subsequent rows are attached, in each new row there is 1 glass less , the top of the tree, one glass .

That's all, you can glue a star to the top of your head, and you can place Christmas balls inside with a glass .

Application “New Year tree” (photo report) Objectives: • clarify knowledge about the New Year holiday, traditions, gifts. • clarify knowledge about the postcard. • develop a feeling of joy upon completion.

Photo report on the master class “New Year Tree” Dear colleagues! On the eve of the New Year, both adults and children are inspired by the invention of new Christmas tree decorations and other New Year's tinsel.

Collective work “New Year tree” Goal: to develop the child’s creative potential through arts and crafts. Objectives: - develop creative activity.

Master class “New Year tree” Very soon everyone’s beloved and long-awaited New Year. I would like to please my family, acquaintances and friends with small New Year's souvenirs. Certainly.

Master class “New Year tree” One of the brightest and kindest holidays is approaching - New Year! And the symbol of this holiday is, first of all, an elegant Christmas tree. Souvenirs.

Making a Christmas tree out of paper with your own hands - master class

Once magazines are read, they are usually thrown away.
But you can do it differently, make a paper tree. To create it, you can use newspapers and old books. Here is a list of what is needed:

a sheet of cardboard or whatman paper;
colorful magazine;
shaped hole punch;
glue gun or PVA;
pencil.

First you need to roll the cardboard into a cone and glue it to fix it in this position.
Prepare decorative elements. To do this, cut them out from a magazine or book using zigzag scissors or a hole punch. These parts need to be given a rounded shape. To do this, screw each one onto a pencil. Now you can glue them to the base, starting from the bottom. Place the pieces as close to each other as possible so that the cardboard is not visible between them. Glue in rows, placing the elements on top of each other. Wrap one of them around the top of your head. The paper Christmas tree is ready. If you like clean lines, then check out the next option.

This tree would be appropriate in an office. On the one hand, it has a strict shape, and on the other, it looks festive. Here's what you need for this craft:

whatman;
double tape;
wrapping;
regular tape;
decorations;
scissors.

Instead of whatman paper, you can use thin cardboard. If you don't have a large enough piece, then you can create one from small ones using tape. Roll this base into a ball and secure with tape. The excess needs to be cut off. Wrap the cone with wrapping paper. To do this, place it on a work surface, place a cardboard blank on top, and secure it with tape at the top of the head. Wrap the cone completely, then secure the edges of the paper with double tape and trim off the excess. The lower part of the tree must also be made flat by removing the paper here with scissors. Decorate the Christmas tree with a star, ribbons, you can decorate it with candies or beads.

Here's what else a paper Christmas tree can be like.

Take:

skewer;
designer paper or colored cardboard;
thick cardboard;
glue or glue gun.

Draw a square on thick cardboard, cut it out and glue it to a skewer. Cut out circles of the same size first. Make holes in them and place them on a skewer pre-lubricated with glue. Then make several slightly smaller circles. The tree trunk itself is also decorated. Gradually cut out smaller and smaller circles and put them on the trunk. Here's what kind of paper Christmas tree you can make using polystyrene foam. For creativity you will need:

foam or cardboard;
green corrugated paper;
scissors;
adhesive tape;
masking tape;
marker;
PVA glue;
hook;
stationery knife.

Draw an acute angle on the foam or cardboard.
If this is difficult to do, then follow the photo tips. First draw a vertical line, then two horizontal ones, after which you will have an even angle. If you want to make a large Christmas tree, then simply glue several fragments together with tape. Cut a strip of corrugated paper, chop it with scissors in the form of a fringe, slightly short of reaching the opposite edge. Start gluing these decorated ribbons from the bottom.

When the entire creative tree is decorated in this way, decorate it as you wish. Glue a rectangle of cardboard from the bottom, after painting it brown. But you can do without this part of the trunk. To attach the tree to the wall, use a hook or double tape.

This is what a wonderful Christmas tree came out of paper. Textile models are very interesting; for them you can use leftover material.

LiveInternetLiveInternet

Tuesday, December 23, 2014 08:52 + to quote book ❆ Master class. Illuminated and simple Christmas trees on plastic glasses (lace and nylon) ❆ * The New Year is approaching! * I made these lace Christmas trees using plastic wine glasses. These Christmas trees are made quickly and do not require any special skills. The basis for the Christmas trees were plastic wine glasses, which I purchased quite inexpensively at the Auchan store (their price is about 100 rubles for a set of six pieces). The transparent base of the glasses gives the Christmas trees tenderness and airiness. I decorated the Christmas trees with fragments of lace or compressed nylon ribbon. Photos in the album “Master class. Illuminated and simple Christmas trees on plastic glasses (lace and nylon),” by ya-romashka on Yandex.Photos

I also purchased illuminated glasses and made my Christmas trees illuminated, now they will become a bright decoration for the New Year’s table.

For the work I needed: * plastic wine glasses * various laces, cut into fragments * crumpled nylon tape * light glasses, but you can do without them - in this case the Christmas trees will not be illuminated, this is also beautiful * glue (I use universal Titanium glue) * beads for the crown and other decor.

For work, I use Titan universal glue, I recently discovered it (I used to use Moment glue). Titan takes a little longer to dry, but after drying it holds much better and products with this glue look neater. And in this work, Titan is just a godsend - without worrying about accuracy, I apply glue to the wine glass freely, after drying the wine glass becomes more textured and remains transparent. If you pour the glue into a bottle with a narrow spout (I have a hydrogen peroxide bottle), then it will be convenient to work with.

Having rolled out a roll from a strip of paper, greased it with glue and inserted it into the stem of the wine glass, I glued the two legs together - we got stands for Christmas trees, then glued the lighted shot glasses to the stands with their bottoms on top.

For the wine glasses on which I will glue the white lace, I painted the coasters with white acrylic paint. Then I tried on the wine glass. Why not a Christmas tree?

I decorated the resulting Christmas tree stands with lace and half beads. If you press the bottom of the light glass, it will light up and begin to change color.

I cut a wide piece of lace into small pieces.

I started gluing the lace fragments from the bottom of the Christmas tree, laying out the lace like a mosaic, applying the glue quite thickly to the wine glass, and at the same time until the glue and half-beads dried. I applied the glue in a circular motion, it looks more interesting...

Having smeared another part of the wine glass with glue, I glued on the next fragments of lace.

Next I glue the lace, approaching the top of the Christmas tree.

Forming the top of the Christmas tree

Having formed the top of the tree, I thickly applied glue to glue the bead to the top of the tree. The lace Christmas tree is ready. And now... One, two, three... Burning Christmas tree!

I also started decorating the Christmas trees from the bottom using crinkled nylon tape. After cutting a piece of ribbon, I loosely glued it to the base of the Christmas tree. If the tape is ordinary, then first you need to gather it on a thread.

Then I glued the second row of tape, etc. up to the top of the head.

Here the piles on the stands are lit in different colors, and the Christmas trees are stacked in piles.

I made these different Christmas trees from one piece of wide white lace.

And here are Christmas trees made of lace of different colors and nylon tape.

Categories:

✿ MY ✿ /…Ideas and master classes… *HAND-MADE.CRAFTS AND GIFTS FOR THE HOLIDAYS/New Year ✿ MY ✿ /…New Year Tree Ball. Decor ideas. *NEW YEAR'S

Tags:
New Year's master class crafts Christmas trees Christmas trees New Year's decor

Cited 5 times Liked by: 5 users

Like share

5
I liked the post
Quoted
0
Saved

Add to quote book
0
Save to links

Liked5
0

Christmas tree made of fabric and threads

To make such a stylish beauty, take:

felt;
cardboard;
scissors;
double tape or glue.

It is better to take material in two shades, then the creative Christmas tree will look more contrasting.

Roll the cardboard into a cone. You can wrap the bottom part with a small amount of tinsel. Cut felt circles and use scissors to make intersecting sections in the middle. They are needed in order to put the felt blanks on the base, which is what you will do. These X-shaped cuts will also help the circles become wavy. First put on the larger blanks, then the medium ones, the smallest ones will be on top. When you fill the entire cone, all you have to do is decorate your creation and admire what a beautiful fabric Christmas tree you have made.

You can also make a very cute tree from threads.

To make this, take:

a cone made of foam plastic or cardboard;
fleecy yarn;
pins;
decorations;
thick yarn.

If you don't have a foam cone, then roll one out of cardboard. To make the work progress faster, make turns with two threads at once. Attach them to the base with pins.

When you have formed the entire cone, do not cut these two threads, but now wrap them around the base, moving down.

Cut the thread and secure the remaining end with a pin. Decorate the Christmas tree with beads or buttons, and also attach them with a pin or sewing.

The next creative DIY Christmas tree is made from wire and thread. Help yourself with pliers or round nose pliers, bend a piece of wire so that it looks like a star. Attach a thinner wire to it, which must first be rolled into a cone. Wrap it with threads. You can simply make such a star out of wire and attach it to the top of the blue Christmas tree you just created.

Your New Year's table will look amazing if you decorate it with edible Christmas trees. Look how wonderful this strawberry tree looks.

You can make a chocolate base and attach the berries to it with the point outward using a toothpick.

Here are some other original trees you can create from products. Check out the related workshops.

Christmas tree made from plastic bottles. DIY Christmas tree made from plastic bottles: instructions, recommendations