How to make a cracker. Paper firecracker - detailed instructions on how to create a simple and loud firecracker (85 photos and diagrams)

Step-by-step making of a paper cracker:

1. Take a sheet of paper or newspaper (for a louder clap).

2. Fold a piece of paper in half from the shortest side. The folds should be corner to corner.

3. On the same side, fold the edges of the sheet so that you get two identical triangles inward.

4. Repeat the same thing on the other side so that all four corners of the sheet are folded inside the structure.

5. Next, you need to unfold the sheet of paper and fold it in half so that the triangles are folded with their vertices on top of each other. Iron the folds well with your hands.

6. Fold the resulting workpiece in half again, along the original fold line, as shown in the picture.

7. The base of our firecracker is now ready, all that remains is to put it into action and ensure long-term performance and rechargeability.

8. In order for our firecracker to begin to take the required form, take a sheet and open the top part so that you get a rectangle, unfold it from right to left.

9. Bend the resulting rectangle in half along the center line.

10. If you get a diagram like in the picture, then you are doing everything correctly.

11. In the same way, we fold the second part of our origami with our own hands.

12. Repeat step No. 9, fold the resulting rectangle in half along the center line.

13. The scheme of our firecracker is ready. It should look like the one shown in the picture. Iron all fold lines.

14. To improve the action of the firecracker, you need to hold it by the lower corner with your hands, and point it slightly at an angle, then sharply throw the structure down. Our work has come to an end. Now you know how to make a paper cracker.

With your own hands, you have made one of the simplest pranks for schoolchildren, which requires only a sheet of paper, a little sleight of hand and a couple of minutes of your time. Have a nice time and positive emotions.

How to make a New Year's cracker?

New Year is a holiday of good mood, and children especially enjoy it. They are simply delighted with the many different festive elements, such as Santa Claus, a Christmas tree, or firecrackers. Children generally have no end to firecrackers; they are ready to shoot with them all day long, but this may not be very dangerous, because who knows how this or that firecracker is made. We will share with you instructions on how to make a safe and reusable firecracker!

How to make a New Year's cracker with your own hands?

For such a craft, we need to prepare several simple and publicly available materials:

• Medical syringe, 10 cc

• Case from Kinder Surprise

You should also prepare scissors, and possibly a hole punch if you don’t have ready-made confetti.

1. We take our paper cylinder and place it on corrugated cardboard, trace the edge and cut out two identical circles.

2. We make a hole in one of the circles and insert a syringe into it.

3. Then, we pull out the syringe plunger and put the second circle on it in the same way.

4. Now, take the body from the Kinder Surprise and in one of the parts, use an awl to make a small hole in the base so that this part can be attached to the syringe. The syringe and part of the kinder must be secured very tightly, otherwise the firecracker may not work.

5. We place our workpiece in a paper cylinder.

6. Carefully secure the cylinder and the workpiece with tape.

7. Let's start creating confetti. We didn’t have it ready-made, so we’ll make it ourselves. We take a hole punch and colored paper and start making holes. The resulting circles from the hole punch are our confetti.

8. We pour the finished confetti into the kinder case. After this, we pull back the syringe piston to the maximum and close the second part of the body, but not too tightly, otherwise the firecracker will not work.

Additional tips for origami design - paper cracker:

Do not make it from paper that is too thin or too thick; this can lead to a bad effect of this origami; it is best to use paper from a newspaper, magazine or regular landscape sheet.
Be careful when using it, do not use it around small children or animals, as it might scare them too much.
You can decorate the cracker with your own hands in different bright colors using pencils or watercolors and play with the cotton as a pop of a different color by painting the inside pocket. An image of a mouth, eyes or flames will look interesting when taken out.
Try putting confetti inside (it can be easily made using a hole punch - making many small circles of colored paper and putting it in the closed pocket of our design), using a cracker you will have confetti flying out, as if from a real one.

The New Year holidays are ahead and we are already thinking about decorations and entertainment for the winter holidays. And what a celebration without firecrackers! But many people do not like the loud sound that is heard when using it...

But there is a way out - make a cracker with your own hands! This way you can maintain silence, but at the same time create a festive atmosphere. This article with detailed instructions will help you with this.

To make a firecracker with your own hands, prepare:

pastry syringes;
confetti, ribbon for decoration;
patterned and corrugated paper;
acrylic paint, scissors;
narrow tape and brush.

It is best to use pastry syringes made of transparent plastic, so you can get the desired shade.

Step 1.

Disassemble the syringes and degrease the surface. This will make working with it much easier: the paint will lay down evenly, and the glue will quickly set between layers. Paint the syringe pistons and caps using acrylic paint.

Step 2.

While the paint is drying, make your own confetti. It is better to take corrugated paper for it - it is lighter, which means it will fall more slowly. Using a hole punch for scrapbooking, press circles out of paper. Make the edges of the blanks curly or leave them straight. Cut colored paper into narrow strips.

Step 3.

Fill the syringe container with the confetti you prepared earlier. Try to place all the sparkles tightly, but at the same time, do not remember all the blanks.

Step 4.

The top of the syringe must be covered with crepe paper. This is necessary so that the confetti does not fall out before the cracker is used. Cut a square of paper, wrap it around the syringe and tape the edges.

Step 5.

Decorate the outside of the container with patterned paper. Glue a bright strip along the contour. This way it won’t be visible what’s inside the cracker, and it will become beautiful.

To activate the firecracker, you need to grab it by the container with one hand and press vertically on the handle with the other.

There is another simple version of a children's cracker.

You can do it together with your children, so they can support the festive atmosphere with you.

It will require the following materials:

air balloons;
toilet paper roll;
glue, acrylic paints and brush;
glitter, scissors and confetti.

Step 1.

Together with the children, decorate the sleeve with paints and leave it to dry.

Step 2.

Apply glue to the cardboard and while it is still wet, sprinkle it with glitter. Determine their number yourself, remove the extra ones.

Step 3.

Cut off the round part of the balloon and place it on one side of the sleeve.

Step 4.

Pour confetti into the empty hole. For the firecracker to work, you need to pull the ball and release it. Just explain to the children that they don’t need to pull the ball too hard, otherwise they can hurt their fingers.

Such crackers will be a bright addition to the New Year's holiday, especially since they can be used several times!

Glitter confetti poppers come in a wide variety of shapes, sizes and types. However, they all have one purpose - to explode in a shower of glitter. Such firecrackers are well suited for concert performances, street and pajama parties. They add fun, but leave behind a mess that is quite difficult to clean up. Therefore, if you decide to use a glitter cracker in the walls of a building, first ask permission from your parents, boss or landlord and never use the cracker with any malicious intent.

Firecracker - balloon

Another original and fun way to entertain guests and delight children at the holiday is to make your own balloon cracker. In addition, such homemade firecrackers will be an excellent addition and frame for competitions or holiday quizzes. Making a New Year's firecracker in the form of a balloon is not difficult. To do this, you only need to prepare a set of balloons, buy or cut up as much confetti as possible, and also find a plastic funnel with which to pour liquids. The further procedure is as follows:

A funnel is inserted into the neck of the balloon and confetti is poured inside with its help. Please note that if in previous firecrackers it was possible to use serpentine with rain, here all the elements should be as small as possible.
When the balloon is filled, you need to carefully inflate it. Do not inhale while inflating! Otherwise, you may choke on glitter and confetti. Therefore, adults should still entrust the inflation of filled balloons. By the way, if you don’t want to tie a balloon to a string and hang ready-made firecrackers around the room, you can inflate the balloons with helium and then they will fly around the room on their own.
Please note that it is best to prepare such homemade firecrackers the day before the celebration and no later than a couple of hours before the guests arrive. Because if you make such crackers too early, the balloon will deflate, and if it’s too late, the confetti will not have time to be evenly distributed inside. When the balls are ready, they are tied with thread or rope and the room is decorated with them.

Well, in order for such a toy in the form of a balloon with a secret to work, it will need to burst. So the cracker will have both a sound effect and a visual one. A cheerful mood and confetti fluttering in the air are guaranteed for everyone!

It is impossible to imagine the New Year without bright colorful fireworks, sparklers and loud colored firecrackers. All this is now presented in stores in a wide assortment for different tastes and colors.

Some people are afraid to purchase various pyrotechnics on the eve of the New Year holidays. There is a way out: remember the lessons of the past and create decorations for the holiday at home. “Inventing” fireworks, of course, is not safe, but cutting out a firecracker with your own hands will not be difficult, even for those who have never done this before.

This type of activity is best done together with other family members, especially small children. This is not only a great way to spend time together and decorate your home with original decorations, but also at least for a while to tear your beloved child away from sitting at the computer.

What would a New Year's holiday and carnival be without New Year's crackers? Even the famous song says “New Year’s toys, candles and crackers...”. You can make some cute candy-shaped crackers with your own hands and decorate your holiday table with them.

To make these poppers, you can use empty cardboard tubes left over from cling film, foil, or kitchen towels, as well as gift paper, ribbon, and any unused cardboard. Place a small toy or candy in each cracker. In principle, you can prepare a separate surprise for each guest, knowing about his hobbies and preferences. For example, if Uncle Styopa collects model cars, buy him one that he doesn’t have. And you can give your niece Masha some beads for the doll.

Without spending a lot of time making these New Year's decorations for your home, you can prepare a very beautiful surprise for your guests.

You will need (for one firecracker):

cardboard tube from cling film, foil or kitchen towels;
gel pen;
ruler;
stationery knife;
thin packaging or crepe paper (cut into strips 20x30 cm);
glue gun (low temperature);
light cardboard, cut into strips 4x19 cm;
2 cable binders;
scissors;
1 or 2 toys or Christmas decorations;
a wish on a piece of paper;
ribbon;
Christmas tree tinsel.

Steps

Openable glitter cracker

Homemade firecrackers with shiny confetti are similar to the factory-made firecrackers that people often buy for New Year's holidays, weddings, birthdays and other special events. Opening crackers first appeared in Britain in the 1840s as gifts given to party guests. If you're preparing for the holiday, you can save a little and prepare homemade glitter crackers for it. To do this you will need the following:

a cardboard tube from paper towels cut in half or a tube from a toilet paper roll;
shiny confetti (multi-colored);
scissors;
stapler and staples for it;
culinary thread or thin cord;
scotch;
beads;
ribbons for serpentine;
cardboard;
tissue.

Make a launch door for the firecracker.
Glitter firecrackers explode when someone pulls sharply on a string tied to the release door. Cut a square of tissue paper large enough to cover the bottom of the cardboard tube (about 7.5cm on a side). Trace the round end of the tube onto a piece of cardboard and cut out the resulting circle. Using hot glue, glue this circle to the center of the tissue paper square. Wait a few seconds for the glue to set. Take scissors or a needle and poke a hole in the center of the circle to insert a piece of cord or cooking string the length of your arm.
Attach the door to the cardboard tube.
Before gluing the paper and cardboard of the door to the tube, tie a bead to the end of the cord. Make sure the bead is located on the inside of the door. Using hot glue, glue the edges of the door wrapping paper to the sides of the end of the tube. At this point, your cracker will look like a tube with one end sealed and a “tail” sticking out of it.
Decorate the tube and fill it with glitter confetti.
Use your creativity to decorate the firecracker. It can be wrapped in colored paper or metal foil, and ribbons or streamers can be glued onto it. Before sealing the back end of the popper, take a funnel or measuring cup and use it to fill the tube ½ or ¾ full with glitter.
Decorate the cracker with a cone-shaped tip.
Use a cone tip to turn a firecracker into a rocket. Draw a circle on cardboard with a diameter of 8.3 mm. Cut out a circle with scissors and make a cut on it from the edge to the center. Pull the edges of the cut so that they overlap each other by about 1.3 cm and form a cone out of the circle. Secure the cone with a stapler.
Open the cracker.
Pull sharply on the cord attached to the trigger door. The door will come off and a shower of glitter will rain down on unsuspecting party guests.
Transform a hanging cracker into a candy cracker.
Modify the design of the trap slightly so that it can be used as a favor for guests rather than just hanging. A candy cracker explodes with sparkles not when the string is pulled, but when the ends of the cracker are sharply torn in opposite directions. Wrap the cardboard tube in thin tissue paper. The sheet of wrapping paper should be large enough so that it extends about ten centimeters beyond the edges of the tube at both ends. Next, cover the body of the firecracker itself (on top of the wrapping paper) with cardboard, thick paper or metal foil. Then twist one end of the cracker sticking out of the wrapping paper and tie it with ribbon. Take a funnel and fill the cracker with glitter confetti. Finally, twist and tie the other end of the cracker with a ribbon.
To detonate a trap, you need to firmly grasp its ends and pull them to the sides. Instruct guests to tear the cracker as sharply as possible so that the contents scatter rather than just spill out.

Firecracker stick

Gather all the necessary materials.
Making a popper wand is very easy, so it's perfect for livening up a birthday or New Year's party. You will need the following:

scissors;

scotch;
paper;
bowl (optional);
glue gun and matching glue sticks.
Cut the paper straws in half.
First, bend the tubes in half, and then cut them along the fold. You will fill these tubes with glitter. If you cut the tubes in half, the crackers will have twice the size. Firecrackers made from shortened tubes are easier to hold and open than firecrackers made from whole tubes.
Read also: Project “Collecting Postage Stamps”
Seal the tube on one side.
You need to seal the tube at one end and leave the opposite end open temporarily. To seal the tube, use a few drops of hot glue. Now it will be easier for you to fill the tube with glitter. Just let the glue harden first.
Pour glitter into the tube.
Hold the straw vertically in your hand and hold it over the bowl with the open end facing up. Make a funnel from a sheet of paper. Insert the prepared funnel into the tube to fill it with glitter. When the tube is full, pour any spilled glitter back into the container you purchased it in. Remove excess glitter from the top edge of the tube. Seal the end with hot glue and let it harden.
Detonate the firecracker.
Pull both ends of the tube until it breaks. The result should be a small explosion of glitter. Shake both halves of the tube to shake out any remaining glitter.
- During the party, hand out these firecrackers to all the guests and set up a countdown so that everyone explodes them at the same time.
Peanut shell cracker
Gather all the necessary materials.
Empty peanut shells make great makeshift firecrackers. They are light, compact and complement small surprise packages well. You will need the following:

scissors;

small sparkles (multi-colored);
glue gun and matching glue sticks;
acrylic paints (optional);
brushes (optional).
Crack open the peanut shell.
Using scissors, carefully crack open the peanut shell. Place the nut lengthwise between the blades of the scissors and squeeze gently. When the shells crack, use your fingers to separate them into two halves and remove the peanuts. Repeat the procedure until you have a sufficient number of blanks for “peanut crackers”. Make sure that all the shells are arranged in pairs.
- Throw any cracked shells in the trash.
Fill the shell with glitter.
Place two paired shell halves in front of you and fill one of them with glitter. Repeat the procedure with all remaining shells.
Glue the shell together.
Apply hot glue to the edges of the glitter filled shell half. Place the edges of the second empty half evenly on the first half and press down. Let the glue harden.
- Once the shell sticks together, it can be painted with acrylic paint. You can even pour the paint into a plastic bowl or cup and add some fine glitter. Then your inconspicuous peanuts will turn into a bright shiny cracker.
Detonate the firecracker.
Give a peanut popper to a friend. Ask him to grab both ends of the shell and break it sharply. The firecracker will explode into a cloud of sparkles.

Probably everyone remembers their childhood, those happy and very carefree days. How many different pranks, how much entertainment, how many funny and not so funny pranks everyone did. Do you remember those same paper crackers that scared us to the point of hiccups and shaking in our knees?

But making them is not so difficult, you just need to have a notebook or landscape sheet on hand. And there is no need to talk about a bad example, because many of today’s adults also made loud paper crackers in their childhood and frightened their peers with this.

So, the time has been found for a grandiose prank, the material is always at hand, and the desire to mischief is always present. We begin to figure out how to make a single-barreled or double-barreled paper firecracker with our own hands.

And of course, if you are already an adult and experienced person, then this will be a great opportunity for you to spend more time with your children and establish close and trusting relationships with them.

Such pranks do not cause any physical harm, and the psychological effect does not exceed the permissible limits - therefore it is absolutely safe for both you and your child.

DIY confetti popper

The basis for creating a confetti cracker is to use cardboard cylinders with various fillings (small pieces of brightly colored paper, foil, glitter, rain, etc.). Along with the simple creation of a sensational cardboard product, you can also experiment with more impressive options.

To make such a “sounding” confetti cracker at home, you need the following materials:

thick cardboard tube for paper towels (cylinder),
cardboard (thin) from packaging for tea, chocolate, sweets, etc.,
paper (colored, corrugated),
cylinder fillers (ready-made confetti or made with a hole punch, finely chopped gift / colored paper / film, Christmas tree “rain”, colorful candy wrappers / foil from candies / chocolate, etc.),
tape (single and double sided),
glue,
toothpick/match,
needle and thread,
scissors.

A similar product is made as follows:

Create holes on thin cardboard for a cylinder with a smaller diameter than the paper towel tube.
Cut a square of corrugated paper (15x15 or slightly larger) and glue a cardboard circle into the middle. In its center, thread a needle with a tight thread without completely pulling out one end, and tie a piece of toothpick or match on the other. Instead, you can use an inflatable ball, which is securely fixed at one end of the cylinder, and then, by tension, used as a firing mechanism.
Glue tape (double) on the edge of the cylinder, and attach a paper square to it (glue can also be used). In this case, the cardboard circle with the match/toothpick should be inside the cylinder.
Decorate the blank with colored paper.
Prepare the existing filling and pour it into the cylinder.
Make a “plug” in the form of a circle from corrugated paper (diameter up to 25 cm) and glue it to the workpiece using double-sided tape/glue.

A cracker made in this way can be used repeatedly when replacing the mechanism of action itself and resuming its filling.

Step-by-step instruction

To begin with, you will need an ordinary notebook or landscape sheet. It must be bent in half along its length, try to do this as evenly as possible. Now, on one side, bend the corners to the middle with neat triangles, trying to make them equal.

To continue the master class, you need to repeat the same procedure on the other side. Now bend this sheet along the fold line that you prepared in advance. The folded corners must be inside the sheet, then the product will turn out really cool.

Let's bend the resulting product in half again, and then straighten it in the opposite direction. It is necessary to obtain a clear fold line, and then bend the resulting corners to this line and straighten them again.

Fold the workpiece along the fold lines so that you end up with a cracker. If you did everything very carefully, you will end up with a cute product that is well suited for a variety of friendly pranks.

How to use?

At a minimum, if your handicraft coincides with a photo of a paper cracker, which is on the Internet, then you also need to learn how to use it.

To get a bright, ringing and really loud sound, you need to grab it with your fingers by the free triangular ends. Due to the fact that the nested inner part flies out and produces bright and clean cotton.

Naturally, you must understand that if it is folded incorrectly, then the sound will be weak. And now some more small lifehacks for creating: use thicker paper, it sounds much louder. Also pay close attention to clean fold lines to get a really cool piece.

Well, and most importantly: you can direct your children’s energy in a more creative and positive direction. And such pranks are a good option for various holidays, birthdays, as well as ordinary get-togethers in a friendly company.

And this is true not only for very small children, but also for adults and serious people. Imagine how surprised your friends will be, and how fun it will be to remember your childhood, those carefree days and get a lot of positive and bright emotions.

Now just imagine what will happen if you make these crackers out of bright paper and put finely chopped leaves inside? This turns out to be real homemade confetti, which is suitable for organizing celebrations of any size. And you can not only create bright holidays, but also turn your favorite activity into a great idea for a start-up.

Also, you can suggest this idea to your child, because for teenagers and children it is very important to have their own pocket money, and such an easy opportunity to earn money for ice cream should turn the energy of even the most restless children into an exclusively positive and completely non-destructive direction. A paper cracker is simple, easy and fun for kids and adults!

Reusable New Year's cracker

Let's give another interesting version of the New Year's cracker. For it we will need: a new disposable syringe of as large a volume as possible (buy at a pharmacy), a sleeve, tape, halves of a surprise egg container, scissors, a hole punch (or ready-made confetti), tape and corrugated cardboard.

We work according to the scheme:

Prepare two circles of corrugated cardboard, the diameter is equal to the diameter of the sleeve.
We put the first cardboard circle on the syringe and lower it until it stops at the very base of the cylinder.
Pull out the piston.
Pull the second circle onto the piston until it stops and place it in place in the syringe barrel.
Poke a small hole in the kinder container.

Advice! Make sure the hole is no larger than the narrowest part of the syringe.

Place the resulting product on the syringe so that both halves of the container can then be connected.
Close the product with a sleeve.
Using tape or glue, secure the corrugated cardboard well to the bottom of the sleeve.
Make paper confetti using a hole punch or use ready-made ones.
Fill the Kinder container as far as it will go.
Pull back the plunger and close the lid of the container, making sure it is not too tight.
Decorate the sleeve with decorative paper.
The firecracker is ready: the device fires when you press the piston. Conveniently, it can be used repeatedly.

You can make these fun firecrackers yourself for a holiday for children and adults, saving money. And the main thing is that you have full control over the safety of the materials from which you create the item. Have a great time!

Photo of paper crackers

For a festive fireworks display, it is not necessary to shoot firecrackers loaded with confetti and cover the entire apartment with small pieces of paper. A paper cracker that does not contain any explosive substances can also clap loudly enough. It will add fun to the atmosphere of the general holiday: someone will jump in surprise, and the rest will laugh merrily.

Our video tutorials will tell you in detail how to make a paper cracker with your own hands, so spectacular but completely safe. The paper art of origami also has in its stock such unusual weapons that do not amaze anyone, but amuse everyone. Try to repeat all the actions of the narrator, and you will get an interesting firecracker.

To make an origami paper cracker, you will need a standard sheet of A4 paper:

first, it is folded in half lengthwise, which creates a dividing line;
All corners of the sheet are bent to this line, after which the sheet is folded in half so that the bent corners are inside;
the entire structure is bent so that the sharp ends are folded together;
Having unfolded the workpiece, we apply the corners to the line marked after the bend;
We bend the resulting square in half so that the folded corners are on the outside.

For the cracker to work, just grab it by the tips of the corners and sharply wave the toy in the air. Under the influence of the air flow, the inside of the cracker will turn outward, making a loud bang. The cracker can be used many times, just tuck the inside out parts and repeat the swing. The faster you swing the cracker, the louder the clap will be. Unlike all kinds of pyrotechnic entertainment, a paper cracker is completely safe: its sound effect is not capable of harming anyone, except maybe a little frightening if the clap sounds unexpectedly.

"Loud" cracker for boys

Young origami masters will be delighted with a paper toy they made with their own hands, which also makes a loud sound. In order to make your own cracker for the game, just take a thick sheet of paper (since the finished toy will need to be shaken vigorously for the sound to appear, colored paper will not work, it is better to choose a standard landscape sheet, or even better - Whatman paper) and perform the following simple manipulations:

Fold the sheet in half, then unbend and bend all four corners to the resulting line in the center.
We lay the workpiece on its side and bend the two corners again to the middle.
Fold the resulting figure in half so that the “wings separate.”
In order for the cracker to “sound,” you need to take it by the protruding sharp tip and make a sharp movement from top to bottom. If everything was done correctly, the toy will make a loud sound.

Video lesson:

We'll show you how to make a double paper clapper that's exceptionally loud and very easy to make. It can be made from a double notebook sheet or from a standard A4 sheet. Despite its exceptional simplicity, the cracker has the ability to regulate the sound strength: it has a special paper protrusion, the dimensions of which can be changed. In accordance with this, the strength of the clap will also change: from weak and muffled to loud, which can really frighten if it clap next to someone unexpectedly.

To begin, fold a sheet of paper in half along the long side.
One of the halves, in turn, is folded in half, and the resulting strip is folded in half.
Next, the sheet is folded in half so that the folded strip remains on the outside. The folded sheet along the edge of the strip is bent alternately in both directions.
The fold line of this sheet folds inward without forming a bend.
The resulting sharp end is clamped between the halves of the folded strip.

The depth of penetration of this end into the strip determines the loudness of the clap. After the cotton, it is enough to reinsert the paper in the middle between the strips and adjust the depth of its penetration, which corresponds to the strength of the cotton. You can repeat this action an unlimited number of times.