Magnetotherapy (13) Infrared and phototherapy (8) Vibroacoustic therapy (6) Laser therapy (4) Quantum therapy (1) Thermotherapy (2) Electrophoresis and Galvanization (5) Electrical stimulation (3)
There are several ways to make Almag Plus (Almag-01) with your own hands. We will tell you about one of the options for making a homemade Almag:
- When making an Almag with your own hands, you first create a frame for the reel. The middle is cut out of MDF with a thickness of six millimeters, a diameter of fifty-eight millimeters;
- Four slits are made for the threads. When winding the wire, you should not overdo it with the tension of the wire, since removing the coil in this case will be problematic. After the coil is ready, it is removed;
- Next, you need to place the finished coils in the housing. To do this, you can take four mounting boxes made of plastic on concrete with lids. They are cut to fifteen millimeters. A piece of plasticine is glued inside;
- A part in the form of a strip is cut from a plastic bottle. It is folded in half and connected with tape. The result should be a ring with a diameter of fifty millimeters;
- We put the resulting ring in the body and press the plasticine through it. The cut edges are removed;
- Separately prepared coils are soldered to the output coils. Everything is placed in boxes and filled with epoxy glue;
- Finally, you will also need three circuits that will allow the device to work correctly.
This method will, of course, help save you money. But is it worth saving on health? When assembling the device at home, you will need a certain skill. Also, during assembly it is necessary to spend a certain amount of time. How accurately it will be possible to repeat the inventor’s experience is also unknown, since the homemade version does not have power adjustment. A DIY almag can be dangerous: the required level of intensity of exposure cannot be established and controlled.
That is why the right decision would be to buy a factory device.
Unlike the “home” version, the Almag-1 and Almag Plus devices are original and have passed all the necessary tests and inspections. They have a guarantee and a long service life. Therefore, it is better to allocate funds from the budget once and use a proven, high-quality device. [td]
Almag 01 Electrical Circuit Diagram With Description
The generator is assembled using a multivibrator circuit using DD1 elements. So Almag is effective at stages 1-2 of gonarthrosis, coxarthrosis and other arthrosis; with polyarthrosis, you should not try to treat all joints at once.
But the systemic effect can also be negative, for example, in some patients blood pressure increases. There was no replacement fuse of the same type, so an MLT-0.5 resistor with a resistance of 1 Ohm was installed in its place.
After connecting the device to the network, a green light on the front surface of the main unit lights up, which indicates that the electrical circuit of the device is working properly. First you need to select 1-2 areas, the most problematic ones, and concentrate on them. And you didn’t even know. Almag + will free you from queues at the clinic
The first is to ring the green wires with a tester and re-solder the broken ones.
If you cannot repair it yourself, you can contact me. Thus, when affecting the joints, it not only treats arthrosis, but also helps to activate the immune system; patients with diabetes experience a decrease in blood sugar levels.
It consists of a control unit and four inductors, which are switched on in series and create a magnetic field. It is better to hook it at the entry point of the rubber cuff into the body.
The instructions for the Almag device indicate that the pulse flowing in the inductor coil has a duration of 1.5 ms and follows with a frequency of 6.25 Hz. The instructions are attached to the text.
Repair cost rub.
My impressions of the ALMAG-01 device
How to use the AMT 02 device?
The main components of the device are the following:
- a special inductor with which magnetic waves and fields are created;
- an indicator that allows the device to operate from the electrical network;
- switches, thanks to which you can adjust the level of the mode and the intensity of irradiation.
Each type of switch has its own operating mode:
- sinusoidal mode (marked with a special mark on the device);
- pulsating mode (mark PP).
In order to operate the Magniter, the voltage in the network must correspond to 220 V, and the frequency must be 50 Hertz.
The duration of treatment is prescribed for each patient individually. All necessary recommendations can be obtained from a physiotherapist.
In order for the device to work for a long period of time during its operation, it is important to adhere to all safety measures and rules for caring for the device itself.
The Magniter AMT 02 device is quite easy to use at home. All you need to do before carrying out the procedure is to read the instructions for the device.
The device can only be used in case of diseases of the joints and spine with the permission of a doctor.
To carry out the procedure, the patient is placed on his stomach (it is important that he lies comfortably). Then all the necessary areas for irradiation are prepared (this can be various levels of the cervical spine or the shoulder girdle area).
If the pain syndrome is pronounced, then therapy begins with the use of sinus mode. If the treatment is long-term, the procedures are carried out in pulsating mode (the switch is set on the letters PP in the PP position).
Then, after installing the device at the selected locations, time is noted (from 15 to 20 minutes) and the device is connected to the network.
Throughout the entire time, the patient should be relaxed and not move. At the end of the session, you do not need to get up immediately; you can lie down in a horizontal position for a few more minutes.
The principle of operation of the Magniter for the treatment of other diseases is the same technique of application. Depending on the diagnosis made on the body, only the areas where the applicators are applied and the level of the desired regime will change.
The use of the device is quite simple, anyone can operate it. Thanks to 4 operating modes, it is convenient to adjust to the desired effect; exposure to low-frequency pulsating and alternating magnetic fields has a healing and analgesic effect on the body.
- The magnetic induction value is set to 10 or 30 mT using a switch;
Devices that influence the body with a magnetic field have long been used in medicine for physiotherapy and magnetic therapy and are recommended by doctors both for preventive action and for primary treatment. The most effective way to relieve pain is with devices like AMT 02, since the penetration of impulses deep under the skin allows you to remove spasms, inflammation and swelling. Therefore, doctors often recommend and use such devices in their practice. The main thing is to always be aware of contraindications and follow the instructions, which experts also warn about.
How to use Almag
Almag devices are convenient because they can be used at home. I intended to make it as a simple impulse distributor.
I cannot help but mention the contraindications to the use of physiotherapeutic methods, including magnetic therapy: blood clotting disorders; problems with hematopoiesis; acute stage of thrombosis; severe cardiovascular diseases: myocardial infarction, heart failure, angina pectoris, cardiac and vascular aneurysm; arrhythmia; patient use of a pacemaker; disorders of the central nervous system; increased excitability; mental disorders; malignant tumors; tuberculosis; low blood pressure; pregnancy; age up to one and a half years.
The standard time of a treatment session, during which Almag Plus or Almag remains in an active state, is approximately 22 minutes.
Parallel to the resistor there is a green LED that lights up when voltage appears on the coil.
As a result, not only is the risk of side effects associated with these drugs reduced, but significant savings are also achieved. The magnetic field has a complex effect on tissue: due to the suppression of nerve impulses, the intensity of pain is reduced; microcirculation of blood and lymph improves, swelling subsides, nutrition of articular cartilage is normalized, congestion is eliminated, and decay products are removed from the body; all processes at the cellular level are activated, tissue regeneration processes are launched; muscle spasm is relieved.
Diode VD2 transmits only positive half-waves of the mains voltage, and after it there is no storage capacitor, which means that the entire power part of the transistors VT1...VT4 and their load in the form of inductor coils works only during the appearance of these half-waves.
The original says 30 layers of 25 turns, but I don’t have enough alcohol in my stock to cover all of this. Treatment at home Almag 01
Treatment
Magnetic therapy helps to cope with diseases of the joints, endocrine, nervous, and cardiovascular systems. After magnetic therapy, pain and inflammation disappear, pathological excitability decreases, due to which it stabilizes the state of the psyche (but in case of severe disorders of the brain it is still not used), processes involving large biologically active molecules ionized under the influence of a magnetic field are stimulated. Home magnetic therapy improves the general condition of the body, therefore it is especially useful for elderly patients - precisely those who often cannot access expensive stationary magnetic therapy. Not all pensioners can buy a device either, but anyone can assemble Hottabych on their own or use the services of a friend.
It is worth remembering that magnetic therapy has contraindications - few, but important. Along with Hottabych’s scheme, it is not difficult to find materials on the Internet about how magnetic therapy is carried out; instructions with a list of contraindications are also available to everyone interested.
Hottabych’s own advantages and the advantages that magnetic therapy has make self-assembly of the device, although not ideal, is one of the good options.
Article Archives
Read reviews about it and similar devices for siphoning money from gullible pensioners. The shape in the form of several pads connected to each other allows you to wrap the device around the patient’s limbs and torso, treating the spine along its entire length at once, which makes magnetic therapy treatment with this device very convenient.
There was no replacement fuse of the same type, so an MLT-0.5 resistor with a resistance of 1 Ohm was installed in its place. In the photo, the last inductor in the circuit is lit. The sequence of actions is as follows: unsolder the wire on one side and twist it with a new one. At the end of the work, it’s about 15 minutes, everything goes out.
Jan First time this magnetic therapy device Fig. After 22 minutes the device turns off automatically. The magnetic field does not have a carcinogenic effect, but can activate the growth of cancer cells in the body. All output holes are numbered and correspond to the pin numbering in the electronic unit in Fig.
The nervous system is extremely sensitive to electromagnetic fields, since neurons are carriers of electrical charge. We are looking for documentation and, oddly enough, we find it: Diagram of the Almag 01 apparatus What do we see? For arthrosis, they resort to a variety of physiotherapeutic procedures - electrophoresis, laser therapy, ultrasound. We bought Almag 01 instructions price
About the device
The answer is simple: make the device yourself. The simplest option is Hottabych. The device diagram is easy to find on the Internet, and the cost of components for assembly does not exceed several hundred rubles. The only thing you need is basic knowledge of electrical engineering and soldering, which many people have nowadays. Thanks to this opportunity, magnetic therapy becomes even more accessible: treatment with such a device is practically free.
In terms of characteristics, it is practically no different from other portable devices for independent use, its effect is exactly the same as low-frequency magnetic therapy, you can perform procedures with its use in all those cases where, in principle, magnetic therapy can be prescribed. The indications for its use are very broad, which means that the device will quickly find a reason to use it.
There is no point in doubting whether magnetic therapy using such a device gives the same effect as when exposed to tissue with a device from one of the well-known companies. Over the years of use, such “handicraft” magnetotherapy has proven itself positively. Reviews about Hottabych agree that the device works no worse than factory devices with similar characteristics, such as Almag, AMT.
"Almag": treatment of prostatitis at home
It has been noticed that a frequency of several hertz is most effective in the proposed device; it is modulated by the network frequency, but in principle, it is individual for each person.
Therefore, if you are planning sequential magnetic therapy of 2 or more areas, after a one-minute session, disconnect the device from the network for the specified time. The green indicator confirms the presence of power, the yellow indicator indicates the activation of the operating mode.
Even a small vibration broke the entire mount of the electric motor to the housing.
The coils are made from whatever comes to hand - a sheet of plastic and a D52 mm sewer pipe. All output holes are numbered and correspond to the pin numbering in the electronic unit in Fig. Let's go further, assemble the first and disassemble the third. The only device that can compete with the Almag device is a more budget-friendly, but no less effective AMT magnetic therapy device; the manufacturer guarantees the operation of this device for 5 years, while for Almag it is 2 years.
Pain is relieved by a traveling magnetic field, which blocks the nerve impulse in the affected area. The first is to ring the green wires with a tester and re-solder the broken ones. The coil itself is wound with wire approximately 0.15mm in diameter on a plastic frame with an approximate internal diameter of 56mm. The original says 30 layers of 25 turns, but I don’t have enough alcohol in my stock to cover all of this.
